The Apple Watch is different from a lot of your everyday tech gear because it is one of the few things in fact, likely the only device you wear on your body. So it would be less important to lock your Apple Watch than a device that might be left out of sight.
All that being said, there are plenty of situations when you won't be wearing it and some situations where you want it inactive while wearing it.
How to remove Activation Lock from your Apple Watch remotely. Go to iCloud.com and sign in with your Apple ID 2. Open ‘Find My Watch'. Go to ‘My Devices' and select your Apple Watch. Click the ‘Erase Apple Watch' next to your device. Go to iCloud.com. How to stop your Apple Watch from locking when it shouldn't TECHMUGG addition, although this isn't confirmed by Apple, some users have reported that the Troubleshooting The Placement Of The Audio Clip In The IMovie IPad App (27). There's a recently discovered flaw by iDownloadBlog that lets thieves reset a stolen Apple Watch without a hitch, which is the result of Apple not including the Activation Lock feature that iPhones have had since iOS 7.
Apple removed the ability to lock the Apple Watch while you are wearing it replacing the feature with what it calls 'Wrist Detection.' With that setting enabled your Apple Watch will be locked as soon as you take it off.
Here in this article we are going to introduce you the tips you should consider for locking your Apple Watch when it is needed. So it is the right place for you to land if you were searching about it.
Tips to Lock Your Apple Watch
Enabling Wrist Detection is the best way to make sure your Apple Watch gets locked when you want it to. If you are using watchOS 3.1.3 or later then the manual lock option on the power menu is no longer available. Therefore, we recommend turning on Wrist Detection.
The other way to force the lock screen is to turn your Apple Watch off. It will require your Passcode upon restarting.
Turning On Wrist Detection
Wrist Detection is super handy and easy to activate. Simply open the settings app on your Apple Watch, tap Passcode and swipe the switch to turn on Wrist Detection.
Using Water Lock
Apple Watch Series 2 and later have a certain about of water protect, yet water can also activate your screen. So whether you are wearing it in the shower or going for a swim, the Water Lock feature is handy for those running watchOS 5 or later.
If you use Apple Watch to track your workouts then this is easy; selecting a water activity in the Workout app will automatically turn on Water Lock. But if you are not counting your shower as a workout then you will want to turn it on via the Control Center. Here's how to do so:
- Swipe Up on your watch to activate the Control Center.
- Tap Water Lock, which is the symbol with a single droplet shape.
- To turn off Water Lock turn the Digital Crown until you Apple Watch says it is unlocked.
Water Lock isn't just for convenience. It also includes a feature used to push water out of the speaker holes in your Apple Watch to prevent any water from causing damage to your device.
Set a Passcode With a New Apple Watch
One of the first things you will be prompted to do when setting up a new Apple Watch is to create a Passcode. You can bypass this step, but it is a quick way to protect your watch right out of the box.
- When pairing your Apple Watch with your iPhone you will be prompted to set up a Passcode. Select Create a Passcode. If you choose a code that might be easy to guess, such as repetitive digits, you will be prompted to verify that you still want to use it.
- An alternate option is to select Add a Long Passcode if you want more than 4 digits for a stronger Passcode.
- Re-enter your Passcode to confirm.
Adding a Passcode to your Apple Watch will automatically enable Wrist Detection, which means that anytime you take your watch off and it goes into sleep mode your Passcode will be required to wake up your watch.
Adding a Passcode After Initial Pairing
If you opted not to make a Passcode when you initially paired your Apple Watch then there are two ways to do it.
- Your first option is to go into Settings on your watch and tap Passcode. This will give the option to Turn Passcode On and you can enter a four-digit code. You cannot set a longer Passcode from your watch directly, you will have to use your iPhone to do that.
- The second option is to use your iPhone to turn on Passcode. In the Apple Watch app on your phone and go to the My Watch tab. Tap Passcode and then select Turn Passcode On. Then enter your desired Passcode.
If you created a four-digit code initially but want to have a more secure Passcode you can update it through your iPhone. The My Watch tab on the Apple Watch iPhone app allows you to select Passcode, which will first require you to unlock your Apple Watch if it is locked. Use the toggle switch to turn off Simple Passcode and then the app will direct you to your Apple Watch for the next steps.
First you will need to enter your current four-digit Passcode. Then you will be able to enter a new, longer option and tap OK. You will be required to re-enter the code to verify.
The Last Word
Passcode lock is an important security feature that is easy to use, and does a great job protecting important data stored on your Apple Watch. Now with this tutorial, you are ready to keep your Apple Watch safe from prying eyes, curious toddlers, and potential water damage.
You can change your Passcode through the Apple Watch by going to Settings > Passcode > Change Passcode. If you are using a four-digit code then your new code is required to be only four digits and if you are using a longer Passcode you cannot change to a four-digit code on the Apple Watch. You can also change the Passcode through the Apple Watch app on the iPhone, following the same steps above.
It would be worth noting that all tech gear in this digital world have some vulnerabilities and are not hack proof. So you should always beware of these security flaws to stay safe and secured. Read our article to see which vulnerability made Apple to disable Walkie-Talkie on Apple Watch.
Leaving your Apple Watch without a Passcode may lead to unauthorized access by anyone who happens to get access to your Apple Watch. In this article, you will find the steps to Enable Passcode on Apple Watch and to change the Passcode, in case you believe that your Apple Watch Passcode has been compromised.
Apple Watch Passcode
While setting up your Apple Watch you may have chosen not to enable the Passcode because you did not like the idea of entering a Passcode on the tiny screen of the Apple Watch every time you turned it on.
Luckily, Apple has kept this fact in mind and has designed the Apple Watch so that you only have to enter the Passcode when you take the Watch off your wrist, re-start the Watch or you want to manually lock and unlock your Apple Watch.
The Apple Watch also needs to be Passcode enabled in order to make use of Apple Pay.
Enable Passcode on Apple Watch
Enabling passcode on your Apple Watch is really easy and can be done from the Watch itself.
1. Open up the Settings on your Apple Watch
2. Next tap on Passcode
3. On the next screen tap on Enable Passcode and enter in your new passcode
You can also enable the passcode on your Apple Watch remotely, via the Apple Watch app on your iPhone.
1. Open the Apple Watch app on your iPhone
2. Tap on the My Watch tab from the bottom of your screen (See image below).
3. Next, tap on Passcode
How To Lock My Apple Watch Screen
4. On the next screen, tap on Turn Passcode On and enter in a passcode for your Apple Watch.
Disable Apple Watch Passcode
If you do not want to be bothered with having to enter a Passcode on the tiny screen of your Apple Watch, you can easily Disable Passcode on your Apple Watch by following the steps below.
1. Open up Settings and tap on Passcode
2. Next, tap on Disable Passcode option and enter in your current passcode
Apple antivirus free. You can also disable passcode via the Apple Watch app on your iPhone.
1. Open the Apple Watch app on your iPhone and tap on My Watch tab (See image below)
2. On My Watch screen, tap Passcode
Apple Flaw Lets Thieves Completely Reset Your Apple Watch ..
3. On the next screen, tap on Turn Off Passcode option and enter in your current passcode
Change Apple Watch Passcode
In case you believe that your Apple Watch Passcode has been compromised, you can easily change the Passcode on your Apple Watch by following the steps below.
1. Open up Settings and tap on Passcode
2. Next, tap on Change Passcode option and enter in your Current Passcode.
3. On the next screen enter in your New Passcode.
You can also make use of the Apple Watch app on your iPhone to change Apple Watch Passcode.
1. Open up the Apple Watch app on your iPhone and tap on My Watch tab (See image below).
2. Next, tap on Passcode
3. On the next screen, tap on Change Passcode option
4. Now on your Apple Watch enter in your Current Passcode
5. On the next screen, enter in a New Passcode
Use Longer Passcode
By default, the Passcode on your Apple Watch is set to only 4 digits to make it easier to unlock your Apple Watch. However, you can use a Passcode with up to 10 digits, in case you do not feel safe with the default 4 digit Passcode.
1. Open the Apple Watchapp on your iPhone and make sure that you are on the My Watch tab
2. Next, tap on Passcode
3. On the next screen, locate Simple Passcode option and turn it OFF by moving the slider to OFF position.
4. Next, enter the Current Passcode for your Apple Watch.
5. On the next screen, enter in the New Passcode with more than 4 digits (you can go up to 10 digits)
Unlock Apple Watch with iPhone
You can customize your Apple Watch so that it automatically unlocks whenever you unlock your iPhone. This is helpful for those users who want to keep their Apple Watch safe, but also do not want to enter in a Passcode on their tiny Apple Watch screen.
1. On your Apple Watch open up Settings and tap on Passcode
2. On the next screen Turn ON the option for Unlock with iPhone.
You can also set this up on your iPhone, using the Apple Watch app.
1. Open up the Apple Watch app on your iPhone and tap on My Watch tab from the bottom menu
2. Next, tap on Passcode
3. On the next screen, turn ON the option for Unlock with iPhone.
Erase Data on Apple Watch After 10 Failed Attempts
To protect the vital information on your Apple Watch you can setup up your Apple Watch so that it deletes your data after 10 failed attempts.
1. Open up Apple Watch app on your iPhone and tap on My Watch tab
2. Next, tap on Passcode Apple os 10 14 mojave.
3. On the next screen, turn on the option for Erase Data by moving the slider to ON option (See image below).
